Annoying Lego Sound Machine!

The Annoying Lego Machine

To make this machine, you will need

• Legos for the arm
• enough technic legos (the ones with holes through them) for the "arm"(obviously)
• 1x4 lego plate (the flat ones, 4 of those)
• 12x1 technic brick (3 of those)
• 8x1 brick (2 of those, holes optional) 
• 6x1 technic brick
• 4x1 technic brick
• 2 blue bush pins (longer than regular pegs)

 all arm pieces

assembled. (sorry the picture is upside down...)

• Legos for mechanism #1
• one 5.5 axle with stopper
• one lego rim (not the tires, but the insides of them!)
• One bush (these are the little circles with a cross inside that go on the axles to make sure things don't move around.)
• one small gear

all mechanism #1 pieces

mechanism #1 assembled

•  Legos for mechanism #2 and stabilizer
• one ten stud long axle
• One bush 
• one half-bush
• one lego rim
• two bush pins
• 1x9 liftarm
• 1x5 liftarm
• one axle pin
• 1x2 technic liftarm

all mechanism #2 pieces

Mechanism #2 pieces assembled, stabilizer assembled and unconnected.

• The Annoying part
• arm with both mechanisms attached
• stabilizer
• ball chain (one of those necklaces with tiny metal balls)Mine was 28 inches. 

IMPORTANT: make sure the chain crosses!!

Note: you might have to put chain on before you connect
mechanism #2 and stabilizer.

There you go!

If you're not sure what the names refer to, here is the resource I used to identify them: http://brickarchitect.com/labels/